Posts Tagged ‘helm seat’

h1

Homemade helm seat

June 19, 2017

The cockpit on our Macwester Malin is deep compared to most centre cockpit yachts that we’ve seen, and as a result when you need to keep a close eye on things there’s really no substitute for standing behind the wheel.

On longer journeys we either stand, or sit on the raised, padded cockpit cushions. Having made good use of the helm seat on Ragdoll during our Irish Sea trip (here) earlier in the season, I decided that it was time for us to have a third option, and so set about making a helm seat from leftover material that I had stored away. As you can see from the photograph above, I didn’t have any suitable hardwood for the seat top and given that the seat is detachable, I used softwood instead. If that becomes a problem, then I can always make V2 from hardwood.

I didn’t faff around with anything too complicated. I just took some measurements and then cut, shaped, and joined pieces of wood until they were robustly constructed, finally fine-tuning the aggregated item to be a snug fit over the lower washboard from our aft cabin. I purchased some waterproof-backed canvas-like material for about £7.00 from eBay, and my step-daughter crafted a simple cover for the leftover foam that I previously cut to shape with a sharp Stanley knife. I used velcro to attach the cushion to the wooden base. Total spend less than £10.

The finished helm seat doesn’t look entirely out-of-place. Yes it’s fair to say that the new navy blue cover isn’t a precise match for the existing blue canvas wheel cover, but the wood staining and varnishing isn’t too far away.

I tested the new seat over the weekend and it worked well, with no movement in any direction whatsoever. So I’m pleased with the fit, even if the finish could be a little better.

Advertisements
%d bloggers like this: